Specifications
| Model | WAC-10 |
| Controller | Digital micro-chip controlled with LCD screen and fluid level display |
| Input power | 415VAC 50/60Hz three-phase (3PH) |
| Nominal cooling capacity is according to: Inlet chilled fluid temperature: 12°C Outlet chilled fluid temperature: 7°C Inlet cooling air temperature: 30°C Outlet cooling air temperature: 35°C | |
| Water pump | 415VAC 50/60Hz three-phase (3PH) 750W 3450 rpm. Max pressure 10 bar. Max liquid temperature: 70°C Pumping speed: 66L/minute |
| Reservoir capacity | 180L |
| Recommended coolant | Distilled water |
| Compressor | 415VAC 50/60Hz three-phase (3PH) 10P |
| Temperature accuracy | +/- 2 °C |
| Condenser cooling air flow | 212,000 cu ft per hour |
| Chilled fluid flow | 63L/min |
| Inlet & outlet diameter | 1 inch (four inlets and four outlets) |
| Unit/shipping weight | 245 kg / 305 kg |
| Unit/shipping dimensions | 1270 x 710 x 1520 mm / 1400 x 890 x 1780 mm (DxWxH) |
| Safety | Over current, compressor delay start, water pump over load, built-in fuse, over-voltage and under- voltage, abnormal operations, phase protection and |
| Working environment | Temperature range of chilled fluid: 5°C - 35°C. Temperature difference of chilled fluid between inlet and outlet: 3°C - 8°C. It is better to use the chiller while the ambient temperature is at or below 35°C |
| Recommended to use with these induction heaters (result may vary on different applications) | High frequency 30kW, 40kW, 60kW Mid frequency 35kW, 45kW, 70kW Low frequency 35kW, 45kW, 70kW |
| CE compliant | Yes |
.jpg)
Standard package
| Item | Quantity | Image |
| WAC-10 recirculating chiller | 1 |  |
| Water manifold | 2 |  |
| User's manual | 1 |  |