Ai 10°C to 25°C 66L/Min 180L Capacity Recirculating Chiller

Click To Enlarge

Item #: WAC-10

WAC-10 digital temperature controlled recirculating water chiller with built-in swivel casters, recommended for our IH series induction heaters (see models below). These chillers have built-in stainless steel tank, water pump and tubing for durability and rust-free operations. Water manifold included for immediate use.

Specifications

Model	WAC-10
Controller	Digital micro-chip controlled with LCD screen and fluid level display
Input power	415VAC 50/60Hz three-phase (3PH)
	Nominal cooling capacity is according to: Inlet chilled fluid temperature: 12°C Outlet chilled fluid temperature: 7°C Inlet cooling air temperature: 30°C Outlet cooling air temperature: 35°C
Water pump	415VAC 50/60Hz three-phase (3PH) 750W 3450 rpm. Max pressure 10 bar. Max liquid temperature: 70°C Pumping speed: 66L/minute
Reservoir capacity	180L
Recommended coolant	Distilled water
Compressor	415VAC 50/60Hz three-phase (3PH) 10P Thermally protected. PS: 22.6 bar TS max: 50°C, TS min: -35°C Lubricant: P.O.E. 160 PZ Refrigerant: R407C-R134a-R404A-R507
Temperature accuracy	+/- 2 °C
Condenser cooling air flow	212,000 cu ft per hour
Chilled fluid flow	63L/min
Inlet & outlet diameter	1 inch (four inlets and four outlets)
Unit/shipping weight	245 kg / 305 kg
Unit/shipping dimensions	1270 x 710 x 1520 mm / 1400 x 890 x 1780 mm (DxWxH)
Safety	Over current, compressor delay start, water pump over load, built-in fuse, over-voltage and under- voltage, abnormal operations, phase protection and
Working environment	Temperature range of chilled fluid: 5°C - 35°C. Temperature difference of chilled fluid between inlet and outlet: 3°C - 8°C. It is better to use the chiller while the ambient temperature is at or below 35°C
Recommended to use with these induction heaters (result may vary on different applications)	High frequency 30kW, 40kW, 60kW Mid frequency 35kW, 45kW, 70kW Low frequency 35kW, 45kW, 70kW
CE compliant	Yes