Ai 10°C to 25°C 33L/Min 17L Vol Digital Recirculating Chiller

Click To Enlarge

Item #: WAC-1

Ai WAC-1 digital temperature controlled recirculating water chiller with built-in swivel casters, recommended for our IH series induction heaters (see models below). These chillers have built-in stainless steel tank and water pump for durability and rust-free operation. two sets of water manifolds included for immediate use.

Specifications

Model	WAC-1
Input power	220-240 VAC 50 Hz single-phase (1PH) 1300 watts
Nominal cooling capacity	1935 kcal/h
Nominal cooling capacity	Nominal cooling capacity is according to: Inlet chilled fluid temperature: 12°C Outlet chilled fluid temperature: 7°C Inlet cooling air temperature: 30°C Outlet cooling air temperature: 35°C
Compressor	Power: 220-240VAC 50Hz 1-PH, LRA42, thermally protected Refrigerant: R410A Number of compressor installed: one
Water pump	Make: LX (CMFL2-20-A-W-G-BABE) Power: 220-240VAC 50Hz 1-PH 370 watts 3.7A 3450 rpm IP55 Flow rate: 33L/min Max pressure: 10 bar. H(max); 20.5m, H(n): 16m
Reservoir volume	17 liters
Cooling fan	Make: Kunli (YWF A2S-300S-5DIIIA05) Power: 220-240VAC 50Hz 1-PH 155 watts 1.35A 2700rpm 16uF/500V IP44 Flow rate: 70,000 cu ft per hour Number of fan installed: one
Temperature accuracy	+/- 2 °C
Water inlet & outlet on chiller	KF40 flange
Manifold	Inlet: KF40, outlet: 8mm quick connect with ball valve
Unit/shipping weight	90 kg / 118 kg
Unit/shipping dimensions	740 x 430 x 890 mm / 910 x 530 x 1070 mm (DxWxH)
Safety	Over current and compressor thermal protection
Working environment	Temperature range of chilled fluid: 5°C - 35°C Temperature difference of chilled fluid between inlet and outlet: 3°C - 8°C. It is better to use the chiller while the ambient temperature at or below 35°C
Compatiable Ai induction heaters	High frequency 4kW, 6.6kW Mid frequency 15kW, 25kW Low frequency 15kW
CE compliant	Yes