Ai 10°C to 25°C 117L/Min 280L Capacity Recirculating Chiller
WAC-15 digital temperature controlled recirculating water chiller with built-in swivel casters, recommended for our IH series induction heaters (see models below). These chillers have built-in stainless steel tank, water pump and tubing for durability and rust-free operations. Water manifold included for immediate use.
Specifications
| Model |
WAC-15 |
| Controller | Digital micro-chip controlled with LCD screen and fluid level display |
| Input power | 415VAC 50/60Hz three-phase (3PH) |
| Nominal cooling capacity |
16700 kcal per hour |
| Water pump |
415VAC 50/60Hz three-phase (3PH) 1 kW 3450 rpm. Max pressure 10 bar. Max liquid temperature: 70°C Pumping speed: 117L per minute |
| Reservoir capacity | 280L |
| Recommended coolant | Distilled water |
| Compressor |
415VAC 50/60Hz three-phase (3PH) 15P |
| Temperature accuracy | +/- 3 °C |
| Condenser cooling air flow | 706,000 cu ft per hour |
| Chilled fluid flow | 95 L/Min |
| Inlet & outlet diameter | 32mm or 1 1/4 inch (four inlets and four outlets) |
| Unit/shipping weight | 295 kg / 360 kg |
| Unit/shipping dimensions | 1400 x 840 x 1650 mm / 1650 x 1020 x 1910 mm (DxWxH) |
| Safety | Over current, compressor delay start, water pump over load, built-in fuse, over-voltage and under- voltage, abnormal operations, phase protection and |
| Working environment | Temperature range of chilled fluid: 5°C - 35°C. Temperature difference of chilled fluid between inlet and outlet: 3°C - 8°C. It is better to use the chiller while the ambient temperature is at or below 35°C |
| Recommended to use with these induction heaters (result may vary on different applications) |
High frequency 40kW, 60kW, 100kW Mid frequency 45kW, 70kW, 110kW Low frequency 35kW, 70kW, 110kW |
| CE compliant | Yes |
.jpg)




Standard package
| Item |
Quantity | Image |
| WAC-15 recirculating chiller |
1 | |
| Water manifold |
2 | ![]() |
| User's manual |
1 |
|
.gif)


